Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in El Paso?
A chimney liner installation in El Paso typically runs $1,800 to $4,500 depending on flue size, height, and liner material, while a partial chimney rebuild costs $3,000 to $9,000 and a full rebuild runs $8,000 to $20,000 or more. A HeatShield flue resurfacing, which restores a damaged flue without full relining, generally lands between $1,200 and $2,800. These are estimated ranges for the El Paso market in 2026; the written estimate we provide after inspecting your flue sets the final price.
We’re El Paso Chimney Sweep, and liner and rebuild work is one of our three core services (the others being sweeping and dryer vent cleaning). We handle the diagnosis and the correction with professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Our technicians have up to 15 years of experience. To talk through your chimney, call (888) 849-7238. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Liner installation: roughly $1,800 to $4,500.
- HeatShield flue resurfacing (no full reline): roughly $1,200 to $2,800.
- Partial chimney rebuild: roughly $3,000 to $9,000.
- Full chimney rebuild: roughly $8,000 to $20,000 and up.
- Estimates are free, and the written estimate sets the final price.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the numbers break down for El Paso homeowners. Use these as planning ranges, not quotes.
| Work | Typical Estimated Range | What Drives It |
|---|---|---|
| Stainless steel liner (single-story, straight run) | $1,800 – $2,900 | Liner length, diameter, and whether the flue needs to be cleared first |
| Stainless steel liner (two-story home) | $2,600 – $4,500 | Extra height and any offset in the flue |
| Insulated liner (added protection for the flue) | Add $400 – $900 | Wrap and thickness, plus fit in a tight flue |
| HeatShield flue resurfacing | $1,200 – $2,800 | Number of flues treated and extent of damage |
| Partial rebuild (upper courses, crown, or shoulder) | $3,000 – $9,000 | How far the damage reaches below the roofline |
| Full rebuild (top to firebox) | $8,000 – $20,000+ | Height, brick and mortar condition, and any interior restoration |
| Chimney cap (Gelco or similar) | $200 – $600 | Size of the flue and cap style |
What pushes cost up or down comes down to a few things: the height of the flue, the condition of the brick and mortar, whether the current liner is clay tile or missing entirely, and how easy the access is. A tight, offset flue is harder to line than a straight run, and labor follows the difficulty. A rebuild on the upper courses only is a much smaller job than a full rebuild that reaches the firebox. We inspect first, then tell you what your chimney actually needs and why, so you can see where the money goes.
What Affects Chimney Liner & Rebuild Pricing in El Paso
- Flue height and layout. A single-story, straight flue is the simplest to line. A two-story chimney with an offset takes more liner, more time, and more care, and the price reflects that.
- Liner material and brand. We source DuraFlex and Famco liner systems for installation work. The grade and insulation level you choose changes the price, and we explain the tradeoffs so you’re not guessing.
- Whether resurfacing will do. Sometimes a damaged flue can be restored with HeatShield rather than fully relined. That decision alone can save you a significant amount, and it’s why the inspection comes before any quote.
- Brick and mortar condition. El Paso’s dry, sunny climate is hard on masonry. Sun exposure and big swings between day and night wear on mortar joints and the crown over time. A rebuild becomes the honest answer when the structure, not just the flue, is failing.
- Age and type of existing liner. An old clay-tile flue that’s cracked or deteriorating often can’t be reused, and the crack has to be addressed, not covered over. That affects both labor and material.
- Access and roof pitch. A steep roof or hard-to-reach chimney adds setup time and safety rigging, and that’s a real line item in the estimate.
Liner or Rebuild: Which Does Your Chimney Need?
A liner fixes the inside of the flue. A rebuild fixes the structure around it. The right answer depends on what the inspection finds. If the brick and mortar are sound but the flue is cracked or unlined, a liner or HeatShield resurfacing usually solves the problem. If the masonry itself is breaking down, spalling, or leaning, a liner alone won’t hold it together and a rebuild is the honest recommendation. We look at both before we quote, so you’re not sold a rebuild you don’t need or a liner on a chimney that needs more.
One safety note, and it matters. A damaged or missing flue liner lets heat and combustion gases reach the framing and the structure, and it’s a real fire and carbon monoxide concern. This isn’t a job to patch or skip. We recommend a trained professional for any liner or rebuild work, and we flag the danger plainly so you can make an informed call.
How Does the Liner Installation Process Work?
The process usually starts with a cleaning and a camera inspection so we can see the actual condition of the flue. From there we measure the height and diameter, choose the right liner system, and prepare the flue so the new liner seats cleanly. The liner goes in as a continuous run, gets connected at the appliance, and is capped at the top. A heat-rated insulation wrap is added when it’s appropriate for your setup. When it’s done, you have a sound, sealed flue that vents properly.
For a rebuild, the work is on the exterior and interior masonry: removing failed brick and mortar, rebuilding the affected section, and restoring the crown and cap so water sheds away from the chimney. We work with Gelco caps and related components in the brand lineup we carry, so the finish at the top matches the work below. Clean flue. Sound liner. Clear vent. That’s the standard we hold to on every job in El Paso.
How to Save on Chimney Liner & Rebuild
- Get the inspection before the damage spreads. Catching a cracked flue early can mean resurfacing with HeatShield instead of a full reline. That’s often the single biggest saving available.
- Ask whether resurfacing is an option. Not every flue needs a new liner. When HeatShield will restore the flue and extend its life, we’ll tell you so.
- Fix the crown and cap before water gets in. A failed crown lets water into the masonry, and that’s how a small repair turns into a rebuild. A properly fitted cap keeps rain and debris out.
- Bundle the work you actually need. If you need a sweep and a liner, doing them in one visit saves a second trip.
- Get a written estimate. Ours are free, and the estimate sets the final price so there are no surprises.
To walk through your options, call (888) 849-7238 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in El Paso?
A chimney liner installation in El Paso typically costs $1,800 to $4,500, with most single-story homes landing toward the lower end and two-story chimneys toward the upper end. Insulation wrap adds roughly $400 to $900. Call (888) 849-7238 for an exact quote. Estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper when the flue can be resurfaced rather than fully relined. A HeatShield resurfacing typically runs $1,200 to $2,800, compared with $1,800 to $4,500 for a full liner. Whether resurfacing is right for your flue depends on the damage, and the inspection tells us which way to go. Call (888) 849-7238 to find out which applies to you.
How much does a chimney rebuild cost in El Paso?
A partial chimney rebuild in El Paso typically costs $3,000 to $9,000, and a full rebuild runs $8,000 to $20,000 or more depending on height and condition. The range widens with how far the damage reaches and how much interior restoration is needed. Call (888) 849-7238 for a written estimate on your chimney.
Can you come today?
Same-day service is often available, so call (888) 849-7238 and we’ll work out the earliest opening. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Why does a chimney liner matter?
A sound liner keeps heat and combustion gases inside the flue instead of letting them reach the framing and structure, which is a real fire and carbon monoxide concern. A cracked or missing liner is not something to patch or put off. Call (888) 849-7238 and we’ll inspect it and tell you what it actually needs.
Why Homeowners in El Paso Call Us for Liner & Rebuild Work
We diagnose and correct in one relationship. When an inspection turns up a problem, the same company handles the fix, so you’re not handed off to a second contractor to do the liner or the rebuild. We source and install from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, so you know what brand of material is going into your home and why we chose it. Chimney sweeping, chimney repair, and dryer vent cleaning are the three services we focus on, which keeps us a specialist rather than a generalist.
Our technicians have up to 15 years of experience, and the estimate is free and written. We’ll tell you what your chimney actually needs, and why, before any work starts. Schedule your free estimate in El Paso and the surrounding neighborhoods, and let’s get your flue sound.
Call (888) 849-7238 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the El Paso market as of 2026. El Paso Chimney Sweep offers free estimates – call (888) 849-7238.
Written by the team at El Paso Chimney Sweep.
What Our Customers Say
"Job's holding up well several months on. It did cost a bit more than the phone estimate because of something they found once they opened it up, but they called me before doing anything extra rather than just adding it to the bill."
- Anika Patel"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Norma Vargas"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Veronica Delgado